Quote basket
已选:16清除全部
BrandNVIDIA (39)SK hynix (25)Samsung (16)Intel (11)Micron (11)White label (OEM) (11)CXMT (2)JTR (2)Seagate (1)Kingston (1)
Capacity (GB)2G (1)4G (3)8G (25)12G (10)16G (25) ×24G (6)32G (27)36G (3)40G (1)48G (6)64G (24)72G (1)80G (2)84G (1)96G (9)128G (10)141G (1)256G (3)480G (2)500G (1)512G (2)1000G (2)1920G (1)2000G (2)3840G (2)4000G (1)4096G (1)6000G (1)7680G (1)10240G (1)15360G (1)
Speed0 (10)1333 (1)1600 (2)1866 (1)2000 (1)2133 (5)2400 (9)2666 (12)2933 (7)3200 (15)3600 (1)4800 (9)5600 (29)6000 (1)6400 (11)8000 (2)9200 (3)
GenerationDDR3 (4)DDR4 (43)DDR5 (45)HBM2 (2)HBM2E (5)HBM3 (4)HBM3E (6)GDDR7 (1)Other (75)1TB (1)2TB (1)4TB (1)
CategoryServer memory (80)GPU cards (39)VRAM chips (19)SSD (14)cpu_desktop (10)Desktop memory (10)Laptop memory (9)Hard drives (6)Server CPU (1)
Schematic, not a photo of this lot Schematic illustration of a registered DIMM: PCB with DRAM packages, register clock driver, gold edge connector and keying notch
Schematic illustration of the module class — shows structure, not a photograph of this specific lot. Photos of the actual lot (labels, batch, test record) are sent on request before you order.

Specifications

Capacity10240 GB
Form factor3.5" SAS
BrandSeagate
ConditionPulled - tested
StockAvailable to order · supplied to your required quantity
ModelST10000NM002G
SeriesExos X16
Capacity10 TB
InterfaceSAS 12 Gb/s
Spindle speed7200 RPM
Cache256 MB
Form factor3.5 inch
Sector format512e / 4Kn
Manufacture date2021-06-09
Country of originThailand
SupplySold per drive or as a lot; 8 TB available at the same price
Part number & technical reference

Part number: HDD-10T-SAS-EXOSX16 · Brand: Seagate · 10240.00GB · 3.5" SAS

What is this part?

This is a 10240.00 GB 3.5" SAS module, built with Seagate memory. Additional attributes recorded for this lot: Model ST10000NM002G; Series Exos X16; Capacity 10 TB; Interface SAS 12 Gb/s; Spindle speed 7200 RPM; Cache 256 MB; Form factor 3.5 inch; Sector format 512e / 4Kn; Manufacture date 2021-06-09; Country of origin Thailand; Supply Sold per drive or as a lot; 8 TB available at the same price.

What condition is this lot in, and how is it tested?

One of 4 grades is used for every lot; this one is graded Pulled - tested. Pulled-and-tested modules have been removed from decommissioned equipment and functionally verified by us. They are the usual choice for buyers who need working parts at a fraction of new cost and who accept normal signs of prior use. Every quotation we issue states the grade, the test status and the physical condition of the lot, so that what you receive matches what you were quoted.

How many are available, and what is the lead time?

This line is supplied to your required quantity from Shenzhen. The lot is graded and tested in Shenzhen before shipment. Pricing is fixed as listed. For every order, request a quote with your target volume and delivery address and we confirm the quantity, the unit price and the shipping window in writing.

What is this lot compatible with?

Compatibility is decided by your platform, not by the part number alone: 4 attributes decide fit (form factor, capacity, rank and speed), plus ECC support where the platform requires it. 3.5" SAS must be matched against your platform's own requirements before ordering — memory compatibility is determined by the server or workstation it is installed in, not by the part alone. The attributes that decide this are form factor, capacity, rank and speed. We do not claim compatibility with any specific system model, because the same part number can behave differently across BIOS revisions and configurations. Send us the platform make, model and firmware version with your enquiry and we will tell you plainly whether this lot is a match, and flag any attribute that needs confirming.

What should you check before you order?

3 attributes decide whether a lot like this is right for your build, and all three are readable from your platform documentation rather than from the module alone:

  • Form factor and keying. The slot a module fits is determined by the platform, and the same capacity exists in mechanically incompatible variants. Confirm which one the chassis accepts before comparing prices.
  • Rank and capacity per channel. Capacity is reached by combining ranks, and some platforms cap how many ranks a channel will address. A module that is electrically correct can still be unsupported if that limit is exceeded.
  • Speed and ECC support. Installed speed is negotiated downward when the platform or the rest of the channel cannot run at the module's rating, so a faster module does not guarantee faster operation — it guarantees headroom.

Send us the platform make, model and firmware revision with your enquiry and we will read them against the lot and tell you plainly whether it fits, rather than leaving you to infer it from the listing.

How does grade affect price and risk?

2 modules with identical part numbers can differ several-fold in price, entirely because of history. New stock carries the lowest risk and the highest cost. Pulled-and-tested stock has been removed from decommissioned equipment and verified functionally, which is why it is the usual choice for buyers who need working parts at a fraction of new cost and who accept normal signs of prior use. Refurbished stock sits between these categories: cleaned, inspected and functionally verified before packing.

Grade is therefore a decision about who carries the risk, not about whether a part is good. A buyer with a test bench and a tolerance for a small failure rate can lower unit cost materially by choosing a lower grade; a buyer who cannot absorb failures should pay for the higher one. We state the grade on every quotation so that this choice is explicit rather than implied.

Which same-generation options do we supply?

This generation has 5 other lines listed right now — a server refresh or a GPU repair line is usually a mix of configurations, so compare capacity, speed, brand and price basis below before requesting a quote:

OptionCapacityConfigurationBrandConditionPrice basis
500 GB 500 GB 3.5" SATA On request Pulled - tested US$ 20
1000 GB 1000 GB 3.5" SATA On request Pulled - tested US$ 30
2000 GB 2000 GB 3.5" SATA On request Pulled - tested US$ 70
4000 GB 4000 GB 3.5" SATA On request Pulled - tested US$ 160
6000 GB 6000 GB 3.5" SATA On request Pulled - tested US$ 210

If the configuration you need is not on that list — a different stack height, a larger density, or another brand — send the part number and target quantity and we check the Shenzhen market per request. We list only lines we can actually ship, which is why the list is short.

What do buyers ask about this part?

What quantity can you supply of HDD-10T-SAS-EXOSX16?
This line is supplied to your required quantity from Shenzhen. Larger volumes are supplied against a confirmed order, so state your target quantity and we will confirm what can be committed and when.
Is the price fixed or quoted?
This line is listed at a fixed unit price. Send the target quantity and delivery address and you receive a written quotation with lot details, test status and the shipping window.
Can I inspect the stock before paying?
Yes. Lots are supplied from Shenzhen and can be inspected before shipment. Buyers based locally, or travelling through, can arrange a visit; remote buyers can request photographs and test records for the specific lot.
What condition grading applies to this lot?
Graded Pulled - tested, meaning pulled from decommissioned equipment and functionally verified by us. The grade is restated on the quotation so that it is not left to interpretation.
Do you ship internationally?
Yes — worldwide shipping from Shenzhen. State the delivery address with your enquiry and the quotation includes the shipping basis. Documentation, packing and any certification requirements are confirmed per order.
What configurations of this generation can you supply?
Listed at the same time as this lot: HDD-0500G-SATA35 (500 GB); HDD-1000G-SATA35 (1000 GB); HDD-2000G-SATA35 (2000 GB); HDD-4000G-SATA35 (4000 GB); HDD-6000G-SATA35 (6000 GB). A configuration that is not listed is supplied on request from Shenzhen stock.
What does the test record for a lot contain?
Every lot is photographed and functionally tested before dispatch, and the record travels with the goods rather than being available only on request. What a usable record states — part number and package markings, capacity and speed as reported by the test platform, error counts over a soak run, and the physical condition of each unit — is set out in What a memory test report should contain. For a specific lot, ask for the record before approving shipment.

Bulk inquiry: aya@memoryb2b.com — include target quantity and delivery address; we reply with lot details, test report and pricing.

Ms Aya Ms Aya